|
|
| |
S2000 - Stainless Steel
Racing Exhaust System
 |
76TA-S (Street) Cat-back
Many may or may
not know, but the s2000 can use an 76mm (
3in) exhaust system in the NA or turbo
configuration. The car is capable of moving
enough air to support its use and benefits
on the street or race circuit. With more an
more NA builds happening recently we felt
there was a place for another good 3in
exhaust on the market. Our particular S2000
uses engine and components from famed S2000
engine and header developer, Hytech. With
all this power potential at our fingertips
we had to step it up with a great
free-flowing exhaust that not only
performed, but was built to last, and easy
for use to service and install both at the
track, and in your driveway.
Features:
- Made in the USA
- 76mm Stainless piping
- High flow muffler canister
- Oval mid pipe resonator for less cabin
noise
- 2 pc Design for easy installation and
trackside service
- Additional hanger for proper secured
mounting
- Great ground clearance
MSRP:
$895.00 USD
|
 |
76TA-R
(Race) Cat-back
Many may or may
not know, but the s2000 can use an 76mm (
3in) exhaust system in the NA or turbo
configuration. The car is capable of moving
enough air to support its use and benefits
on the street or race circuit. With more an
more NA builds happening recently we felt
there was a place for another good 3in
exhaust on the market. Our particular S2000
uses engine and components from famed S2000
engine and header developer, Hytech. With
all this power potential at our fingertips
we had to step it up with a great
free-flowing exhaust that not only
performed, but was built to last, and easy
for use to service and install both at the
track, and in your driveway.
Features:
- Made in the USA
- 76mm Stainless piping
- High flow muffler canister
- No resonator for best weight savings and
maximum race sound
- 2 pc Design for easy installation and
trackside service
- Additional hanger for proper secured
mounting
- Great ground clearance
MSRP:
$795.00 USD
|
 |
| |
E9X M3 - Stainless Steel X pipe
|
Street - OEM Catalysts
The Challenge
Street X Pipe features 304 stainless steel
piping and flanges, twin high flow
resonators, and a precision fabricated X
section. This pipe slip fits after your OEM
cats, for easy installation with NO check
engine lights! Best of all, no exhaust smell
to alert the law at inspection. All bolts,
gaskets, and stainless clamps necessary for
install are included.
Features:
- Made in the USA
- Full stainless steel construction
- Laser cut and formed mounting brackets
- 2.5 in Piping
- Twin resonators for noise and drone
reduction
- Retains factory primary cats
- No check engine light
- Flanged design for easy installation and
upgrade options
- 10 wheel hp and 15 ft tq gains with
factory exhaust
- Increased low end power
MSRP:
$1095.00 USD
|
Image coming
soon |
Race - Catless
The Challenge
Sports X Pipe features 304 stainless steel
piping and flanges, twin high flow
resonators, and a precision fabricated
X section. This is a full bolt on
solution that connects directly to the OEM
header flange. All bolts, gaskets, and
stainless clamps necessary for install are
included. ECU reflash or CEL deleter is
required to turn off the check engine light
Features:
- Made in the USA
- Full stainless steel construction
- Laser cut and formed mounting brackets
- 2.5 in Piping
- Twin resonators for noise and drone
reduction
- Full bolt on installation
MSRP: $1795.00 USD
|
Image coming
soon |
Sports -
High Flow
Catalysts
The Challenge
Sports X Pipe features 304 stainless steel
piping and flanges, twin high flow
resonators, 200 cel High flow metallic race
Catalysts, and a precision fabricated X
section. This is a full bolt on
solution that connects directly to the OEM
header flange. All bolts, gaskets, and
stainless clamps necessary for install are
included. Get all the performance gains
without the exhaust smell! ECU reflash or
CEL deleter is required to turn off the
check engine light
Features:
- Made in the USA
- Full stainless steel construction
- Laser cut and formed mounting brackets
- 2.5 in Piping
- Twin resonators for noise and drone
reduction
- Full bolt on installation
MSRP: $2095.00 USD
|
Image coming
soon |
|
|
|
| |
| |
| |
| |
| |
| |
|
|
